| |
 |
 |
 |
 |
CNC BORING MILLS
3 Axis - 360.0" x 84.0" Vertical
4 Axis - 96.0" x 96.0" Vertical
|
| (1) DeVLIEG Model 2B CNC Spiramatic Jigmill |
Dynapath 4-Axis CNC control system, 2.5" diameter spindle bar
with #40 NMTB Taper, 12" bar feed, 12" table retraction,
24" vertical travel, 36" horizontal travel,
36" x 24" table, 20" x 20" air index table, 5 hp spindle motor |
| (1) DeVLIEG Model 4R-80 CNC Spiramatic Jigmill |
Fanuc 11M
4" diameter spindle bar with #50 NMTB Taper, 20"
bar feed, 20" table retraction, 60" (56.5")
vertical travel, 80" horizontal travel,
40" x 80" table, 26" x 26" air index
table, 30" x 30" air index table, 30 hp spindle
drive motor, tool probe sensor, rescrapped 1996 |
| (1) DeVLIEG Model 5K-96 Spiramatic Jigmill |
4 axis
Allen Bradley 8200 CNC control with NCTP option, 5" diameter
spindle bar with #50 NMTB taper, 24" bar
feed under CNC control, 24" table retraction under CNC control,
60" (58.5") vertical travel, 96" horizontal travel,
48" x 96" table, 50" x 50" air index table,
30 hp dc spindle drive, 10 to 1000 Rpm, rescrapped 1996 |
| (1) DeVLIEG Model JMC 5K-96 Spiramatic Jigmill |
4 axis
Allen Bradley 8600 CNC control, 5" diameter
spindle bar with #50 NMTB taper, 24" bar
feed under CNC control, 24" table retraction under CNC control,
96" vertical travel, 96" horizontal travel,
48" x 96" table, automatc tool changer, 30 hp dc spindle drive, 10 to 1000 Rpm, rescrapped 1998 |
| (1) GIDDINGS & LEWIS Floor Horizontal Boring Mill, Model 65-H5-7 |
G & L Model 400 CNC
control, 5" diameter spindle bar with #50 NMTM taper,
36" bar feed, 96" vertical travel, 360" (30') horizontal travel.
Twin (2) G & L air lift infeeding rotary tables, 96" x 60",
72" infeed by ball screw driven with Getty's drive.
One 160" x 72" stationary floor plate. G & L type "A"
heavy duty right angle (360 degree) spindle attachment. G & L
type "D" heavy duty sliding right angle head attachment adjustable
over range of 19" to 38" from machine head. 40 hp spindle
drive motor, 6 to 1020 Rpm, rebuilt 1996 |
| (1) GIDDINGS & LEWIS Floor Horizontal Boring Mill, Model G50-FX |
G & L Model 800 CNC control, 5" diameter spindle bar with #50 NMTM taper,
36" bar feed, 96" vertical travel, 288" (24') horizontal travel.
Single (1) G & L 90 CNC infeeding rotary tables, 72" x 60",
48" infeed by ball screw driven with Getty's drive.
One 144" x 60" stationary floor plate. 40 hp spindle drive motor, 6 to 1020 Rpm,
Vertical travel 95.59" above fixed table, 2.31" below fixed table,
97.80" total. 10" travel from spindle face to front of fixed table |
|
|
|
 |
 |
|
|
